Category: Breitling

For the first ten years of the Rolex Sea-Dweller’s existence, its dial bore both the “Sea-Dweller” and “Submariner 2000” names in red text. However, in 1977, Rolex released a new Sea-Dweller – still with the reference number 1665 – that completely abandoned the red text lines and the Submariner name in favor of an entirely black and white dial.

Thanks to the monochrome all-white text on the dial of the new 1665 Sea-Dweller, the watch earned the nickname “Big White” among Rolex collectors as a way to help distinguish it from the earlier 1665 Sea-Dweller, which had red text on its dial face. Furthermore, the decision to change the Sea-Dweller to an entirely black and white dial will be a lasting one, lasting 40 years until the 126600 Sea-Dweller, which will be launched at Baselworld 2023.

To match the updated dial of the “Great White” Sea-Dweller, the case back of the new generation of Type 1665 best swiss replica watches features a slightly more elaborate engraving in which the Rolex name curves along the curve of the recesses rather than appearing in a straight line. Aside from the subtle updates to the dial and case back, the new generation of Model 1665 Sea-Dweller watches are very similar to those that came before them with red text; however, the updates on the “Great White” represent far more significant than the actual changes to the watch itself.

The Rolex Sea-Dweller started as a submariner, modified to be more water resistant to withstand the deeper depths below the ocean’s surface. For the first decade of its existence, the Sea-Dweller bore the Submariner name on its dial, so it is unclear whether the Sea-Dweller was a separate watch line or just a special version of the Submariner designed for more strictly specialized use.

To better understand the difference between the two watches, the Submariner had a depth rating of up to 200 meters/660 feet in this era, which in itself is still impressive. It wasn’t until the early 1980s that Rolex upgraded the Submariner to 300 meters/1,000 feet. On the other hand, the Sea-Dweller ref. 1665 was made more for deep saturation diving, with a helium escape valve and a depth rating of up to 610m/2,000ft, hence the original name “Submariner 2000”. This depth rating would eventually increase to an impressive 1,220 meters/4,000 feet, as is still the case with contemporary Sea-Dweller high quality replica watches produced by Rolex.

The Reference 1665 “Great White” Sea-Dweller was in production for approximately five years. During that time, minor changes occurred, and five different dial variations were produced (Mark 0 to Mark IV). In addition, production of the “Great White” Model 1665 continued into the early 1980s – a few years after Rolex announced the new 16660 Sea-Dweller with sapphire crystal in 1978. Unusually, both Sea-Dweller models seem to have had several years to co-exist.

Although it is not the rarest Sea-Dweller collection Rolex has ever produced, the 1665 “Great White” helped make the Rolex Sea-Dweller collection its unique, highly specialized, super-water-resistant tool watch – separate from the Submariner and designed specifically for saturation diving and professional use.

As everyone knows that though Breitling is regularly associated with aviation, its dive watches are one of the bestsellers. Actually, the Superocean Heritage is their top-selling line. The more contemporary designed Superocean line had updated at Baselworld 2019, and the brand really did introduce a version for every type of wrist. In case of different sizes of 36mm, 42mm, 46mm, and a unique 48mm, Breitling replica watches may have found the 42mm and 44mm sizes are the sweet spot for most people (though Breitling has truly made the Superocean a men’s and women’s watch collection). Additionally, the colors of watches we all know and expect are available, but personally I found the orange and white dial models on the 42mm Superocean is pretty excellent. Let’s go ahead for the 42mm, 44mm, and 46mm versions rightly.
With the coming version, this updated Superocean remedies many of the issues a lot of people, including myself. Much of this had to do with the dial, which had an outer seconds ring, minute track, numerals for each hour marker other than 3, and a 24-hour track. Additionally, there were a date window, some hour indices, and the Breitling logo, which thoughtlessly cut through the digits on said 24-hour track, as well as there are four lines of text at 6 o’clock. Really, the dial just needed some editing and, luckily, that’s what it got.
The new Superocean Automatic gets rid of the minute track, 24-hour track, a line of text, just leaves hour marker numerals at 12, 6, and 9, and there’s totally nothing that is cutting through another aspect of the dial finally. It’s a lesson on how simply editing some things down can make all the difference. In all, this makes the gap between the Superocean and Superocean Heritage more about personal preference than it was before, which was an unlucky duality showing a brand’s worst and best instincts separately. 
All of the Superoceans here are equipped with the same Caliber 17, which is a high widely used Breitling movement that operates at 28,800 vph and has a 38-hour power reserve.
The Superocean Automatic in 42mm measures 13.32mm-thick and 500 meters water-resistant. All of these are in steel and come in three color schemes on either a bracelet or a rubber strap. There’s the orange dial version with black bezel, white dial with blue bezel, and black dial with black bezel. The black version is pretty beautiful, and I’m assure that it will be in numerous sale, but I am really fond of the white and orange dial models. The color contrast on each respective dial doesn’t make a watch look too seriously but also isn’t gimmicky.
While the 44mm version is a little bigger in height, at 14.21mm-thick, but water resistant to 1,000 meters. These also come in steel with more traditional colorways, with the black dial and black bezel version along with the blue dial and blue bezel version. In addition to, each of them on either rubber strap or steel bracelet are available.
With 16.85mm thick and water resistant to 2,000 meters, available in the black dial and black bezel or blue dial and blue bezel, the 46mm version comes in a black DLC-coated steel case, rather than simple stainless steel in the smaller models. I suppose if someone who have great interest in this bigger version and is going to hunt for a more aggressive-looking Breitling timepiece, this wristwatch should be the best choice definitely. I am very fond of it personally, I want to pick up the standard steel if I have a chance to consume these wonderful goods.

We all know that the Breitling replica were selling very well in past few years, but now they are not as popular as replica Rolex, Audemars Piguet and Panerai. However, Transocean, which is a newly launched Breitling model, is one of my favorite dress fake watches. Like IWC Portofino, I never saw a Breitling watch like Transocean that has such a fresh outlook, it is made of stainless steel and has a simple dial design, like this one, Breitling Transocean Day Date, stainless steel case, hour markers and hands beautifully match with white dial. The one I am going to introduce is a replica Breitling Transocean watch, which is made by V7 factory, here we call it V7 maker. Perhaps you never heard of this watch maker, yes, this is also the first time to know this maker. We all know large factories like Noob, BP and J12, but some small factories we do not know can also produce good replica watches. 
About other materials applied on the replica, domed sapphire crystal is imported and has a high transparency, brown leather band uses calf leather imported from France, its color and texture are the same as the band on genuine watch. About movement, it is a clone Cal. 45 automatic, movement plates are curved with Geneva Stripes, Day and Date are instant-jumping when you do adjustment. So the movement has achieved the best accuracy.
V7 Maker replicated on a basis of genuine watch, to build a top end 1:1 replica that is hard to be identified. All genuine watch parts are disassembled and researched so that the factory could build a perfect replica. So every replica watch component could be interchanged with genuine watch, they are 1:1 manufactured.
Case is in size of 43mm*12.8mm, it is made of solid 316L stainless steel, smooth and round bezel is well polished case, which has a certain degree of arc so that it could fit your wrist better. The dial is the most favorite place, it is in white and silver hour markers are three-dimensional, there is one round dot next to each bar-shaped hour makrers except markers at 3, 6, 9 and 12. These round dots are luminous. Square box window with black edge positioned at 3 o’clock is displaying date, while the fan-shaped window at 12 o’clock is showing week.